Tear-Aid permanent powerhouse as a last resort for shelter repair

For really very strong tent repair Tear-Aid repair a brand new and unique for all types of fabric and materials. This transparent way of repairing itself immediately larger holes and / or cracks in all types of surfaces. It is extremely strong, supple, elastic and transparent. Therefore Tear-Aid a permanent cure for damage to canvas. The solution thus awning repair cracks in a caravan awning, tent groundsheet, sunscreen, umbrella, inflatable boat, etcetera.

Tear-Aid repair larger cracks and holes in include: canvas, tarpaulin, PVC groundsheet tent, awning cloth, rubber (inflatable) boats, solar and umbrellas, coats and bags. But also products made of aluminum, stainless steel, fiberglass and more. Tear-Aid is available in Type A and type B. Both types have the same unique qualities but can be applied to various materials.
The characteristics succession: absolutely waterproof - extremely strong - airtight - highly elastic - no yellowing - very versatile - not dry - transparent - permanent.

Tear-Aid repair fabric has a more than excellent adhesion and can be used at temperatures from -28 to +60 degrees. It allows liquid adhesive and / or stitching unnecessary. Stretches and springs back. Tension may easily without leaving or tearing loose. Prevents further bleeding of cracks. Can be easily cut to size.

Crack in sailcloth, canvas awning? Tear-Aid repairs include: canvas, rubber (inflatable) boats, solar and umbrellas, coats and bags. But also products made ​​of aluminum, stainless steel, fiberglass and more. Tear-Aid is available in type A and type B. Both types have the same unique qualities but can be applied to various materials. Please Scroll further down for more specific information and instructions.

Awning repair: first, check through the diagram below (scroll down) or you need to repair equipment or canvas type A or B. Make sure the surface is completely dry. Tear-Aid Keep out of reach of children.

If cracks or holes in the middle of the material:

1. Attach the dust surrounding the damage grease with an alcohol swab.
.... Make sure the surface is completely dry.
2. Cut Tear-Aid patch to the correct size. For optimal connection
The patch .... need at least 2.5 centimeters adhesion on all sides of the crack.
3. Trim the corners preferably around.
4. Gently pull a piece of approximately 1 inch of the paper from
.... The patch off. Stretch this patch slightly so the paper tears.
5. Lay the damaged material together.
6. Insert the stripped piece Tear-Aid to the crack. Remove the rest of
.... The transfer paper and simultaneously the rest of the patch to the material.
7. Press the whole again firmly from the middle.

If cracks or holes in the edge of the material:

1. Attach the dust surrounding the damage grease with an alcohol swab.
.... Make sure the surface is completely dry.
2. Cut Tear-Aid patch to the correct size. For optimal connection
The patch .... need at least 2.5 centimeters adhesion on all sides of the crack.
3. Coat the outside of the material the patch and turn the fabric.
4. Insert the supplied nylon thread around the edge for reinforcement.
5. Fold the protruding part of the patch to the edge.
6. Apply a second patch on the other side of the material.
7. Press the patch firmly and cut the protruding part of the nylon thread.

Content Tear-Aid repair:

1 x TEAR-AID repair patch (30 x 8 cm)
1 x drain wire (45 cm) for repairing tears at edges
4 x alcohol pad for cleaning of the surface
1 x manual